Solution:ERROR: Failed to add user layer
sudo sysctl -n -w fs.inotify.max_user_watches=524288
ERROR: Layer meta-altera-refdes is not compatible with the core layer which only supports these series: zeus (layer is compatible with thud)
Solution:
not found... or version BSP deffers from PetaLinux
Pynq Issue:
The PYNQ build flow isn’t compatible with Petalinux 2021.1 - please use the versions specified on this page PYNQ SD Card — Python productivity for Zynq (Pynq) 28 (2020.1 for PYNQ 2.6). We’re currently in the process of updating.
According to the log file :
ERROR: Layer meta-user is not compatible with the core layer which only supports these series: zeus (layer is compatible with gatesgarth)
you should set the correct layer support as follow: inside meta-user/conf/local.conf file, try to add:
LAYERSERIES_COMPAT_mensi-user= “zeus gatesgarth”
Adding this line to conf file worked for me LAYERSERIES_COMPAT_pynq = “zeus”
https://xilinx-wiki.atlassian.net/wiki/ ... evelopment
https://www.hackster.io/whitney-knitter ... tch-6e0920
Install required packages for PetaLinux.
sudo apt-get install gawk python build-essential gcc git make zlib1g-dev gcc-multilib zlib1g:i386 gzip
Make the installer executable:
chmod +x petalinux-v2019.2-final-installer.run
Let /bin/sh be bash:
Then answer NO.sudo dpkg-reconfigure dash